Water for injections (Solvent) Instructions for Use

Instructions
Dosage forms

ATC Code

V07AB (Solvents and diluents, including irrigation solutions)

Active Substance

Water for injections (Ph.Eur. European Pharmacopoeia)

Clinical-Pharmacological Group

Solvent for the preparation of injectable dosage forms

Pharmacotherapeutic Group

Other non-therapeutic agents; solvents and diluents, including irrigation solutions

Pharmacological Action

Water for injections does not possess pharmacological activity. It is used as a solvent intended for the preparation of infusion and injection solutions, ensuring optimal conditions for the compatibility and efficacy of substrates and water.

Water is the basis of various transfusion preparations, biological tissues, and fluids (blood, lymph, cell plasma, etc.), and is necessary for metabolic processes.

Under normal conditions, water is excreted in urine, feces, sweat, and through respiration. Fluid loss through sweat, respiration, and feces occurs regardless of fluid intake. Maintaining adequate hydration requires 30-45 ml/kg/day of water in adults; in children – 45-100 ml/kg, and in infants – 100-165 ml/kg.

Pharmacokinetics

When alternating water and electrolytes are administered, homeostasis is maintained by the kidneys.

Indications

Dissolution and dilution of medicinal products for their parenteral (injection/infusion) administration immediately before use.

Used for the preparation of sterile infusion and injection solutions from powders, lyophilisates, and concentrates.

ICD codes

Open the list of ICD codes

ICD-10 code	Indication
Z51.4	Preparatory procedures for subsequent treatment or examination, not elsewhere classified

ICD-11 code	Indication
QB9A	Preparatory procedures for subsequent treatment

Dosage Regimen

The method of application and dosage regimen for a specific drug depend on its form of release and other factors. The optimal dosage regimen is determined by the doctor. It is necessary to strictly adhere to the compliance of the dosage form of a specific drug with the indications for use and dosage regimen.

Use strictly as a solvent for the preparation of injectable medications immediately before administration.

Adhere precisely to the volume, method, and rate of administration specified in the instructions for the active drug being dissolved or diluted.

Prepare all solutions under aseptic conditions to maintain sterility.

Inspect the ampoule before use; do not use if the packaging is damaged or the solution appears cloudy.

For drugs requiring specific concentration limits, dilute with water for injections only within the specified range.

Exercise extreme caution with volume control in neonates and young children to prevent water-electrolyte imbalances.

Never use this solvent for drugs where another specific solvent is mandatorily prescribed.

Avoid mixing water for injections with oily injection solutions.

When combining with other parenteral drugs, perform a visual check for incompatibility prior to administration.

Discard any unused portion of the prepared solution immediately; do not store reconstituted medications unless specified in the drug’s instructions.

Adverse Reactions

Determined by the side effects of the drug for which the water for injections was used for dissolution or dilution.

Contraindications

Water for injections is not used for the dissolution and dilution of drugs for which another solvent is specified as mandatory.

Use in Pregnancy and Lactation

Use during pregnancy and breastfeeding is determined by the instructions for use of the drug for which the water for injections will be used for dilution.

Special Precautions

Water for injections should not be mixed with oily injection solutions.

Drugs whose concentration must be within certain limits are diluted with water for injections strictly within the specified limits.

Special control over the amount of administered solutions prepared using water for injections is required in newborns and young children, in whom even the administration of small volumes can lead to disturbances in water-electrolyte balance.

If the packaging integrity is compromised or the contents are cloudy, water for injections should not be used.

Effect on the ability to drive vehicles and mechanisms

The effect on the ability to perform potentially hazardous activities requiring increased concentration and speed of psychomotor reactions is determined by the properties of the drug for which the water for injections was used for dissolution or dilution.

Drug Interactions

When mixing with other drugs (infusion solutions, concentrates for the preparation of infusion solutions, injection solutions, powders, dry substances for the preparation of injection solutions), visual control for compatibility is necessary (pharmaceutical incompatibility may occur).

Storage Conditions

Store at 2°C (36°F) to 25°C (77°F). Keep in original packaging, protected from light. Keep out of reach of children.

Dispensing Status

Over-the-Counter

Important Safety Information

This information is for educational purposes only and does not replace professional medical advice. Always consult your doctor before use. Dosage and side effects may vary. Use only as prescribed.

Medical Disclaimer

Brand (or Active Substance), Marketing Authorisation Holder, Dosage Form

Water for injections [AcuLife Healthcare Pvt. Ltd. (India)]
Solvent for preparation of injectable dosage forms: 5 ml or 10 ml amp. 50 pcs., 20 ml amp. 40 pcs.

Marketing Authorization Holder

AcuLife Healthcare Pvt. Ltd. (India)

Dosage Form

Water for injections

Solvent for preparation of injectable dosage forms: 5 ml or 10 ml amp. 50 pcs., 20 ml amp. 40 pcs.

Dosage Form, Packaging, and Composition

Solvent for the preparation of dosage forms for injection transparent, colorless.

	1 ml
Water for injections	100%

5 ml – plastic ampoules (50) – cardboard packs.
10 ml – plastic ampoules (50) – cardboard packs.
20 ml – plastic ampoules (40) – cardboard packs.

Water for injections [Jodas Expoim, Pvt. Ltd. (India)]
Solvent for preparation of injectable dosage forms: 5 ml or 10 ml amp. 5, 10, 20, 50, or 100 pcs.

Marketing Authorization Holder

Jodas Expoim, Pvt. Ltd. (India)

Dosage Form

Water for injections

Solvent for preparation of injectable dosage forms: 5 ml or 10 ml amp. 5, 10, 20, 50, or 100 pcs.

Dosage Form, Packaging, and Composition

Solvent for the preparation of dosage forms for injection	1 amp.
Water for injections	100 %

5 ml – glass ampoules (5) – contour cell packaging (1) – cardboard packs.
5 ml – glass ampoules (5) – contour cell packaging (2) – cardboard packs.
5 ml – glass ampoules (5) – contour cell packaging (10) – cardboard packs.
5 ml – polyethylene ampoules (5) – contour cell packaging (1) – cardboard packs.
5 ml – polyethylene ampoules (5) – contour cell packaging (2) – cardboard packs.
5 ml – polyethylene ampoules (5) – contour cell packaging (10) – cardboard packs.
5 ml – glass ampoules (10) – contour cell packaging (1) – cardboard packs.
5 ml – glass ampoules (10) – contour cell packaging (2) – cardboard packs.
5 ml – glass ampoules (10) – contour cell packaging (10) – cardboard packs.
5 ml – polyethylene ampoules (10) – contour cell packaging (1) – cardboard packs.
5 ml – polyethylene ampoules (10) – contour cell packaging (2) – cardboard packs.
5 ml – polyethylene ampoules (10) – contour cell packaging (10) – cardboard packs.
10 ml – glass ampoules (5) – contour cell packaging (1) – cardboard packs.
10 ml – glass ampoules (5) – contour cell packaging (2) – cardboard packs.
10 ml – glass ampoules (5) – contour cell packaging (10) – cardboard packs.
10 ml – polyethylene ampoules (5) – contour cell packaging (1) – cardboard packs.
10 ml – polyethylene ampoules (5) – contour cell packaging (2) – cardboard packs.
10 ml – polyethylene ampoules (5) – contour cell packaging (10) – cardboard packs.
10 ml – glass ampoules (10) – contour cell packaging (1) – cardboard packs.
10 ml – glass ampoules (10) – contour cell packaging (2) – cardboard packs.
10 ml – glass ampoules (10) – contour cell packaging (10) – cardboard packs.
10 ml – polyethylene ampoules (10) – contour cell packaging (1) – cardboard packs.
10 ml – polyethylene ampoules (10) – contour cell packaging (2) – cardboard packs.
10 ml – polyethylene ampoules (10) – contour cell packaging (10) – cardboard packs.

Water for injections [Octapharma Pharmazeutika Produktionsges m.b.H. (Austria)]
Solvent for preparation of injectable dosage forms: fl. 5 ml, 10 ml, or 20 ml 50 pcs.

Marketing Authorization Holder

Octapharma Pharmazeutika Produktionsges m.b.H. (Austria)

Manufactured By

Soluparm Pharmazeutische Erzeugnisse, GmbH (Germany)

Dosage Form

Water for injections

Solvent for preparation of injectable dosage forms: fl. 5 ml, 10 ml, or 20 ml 50 pcs.

Dosage Form, Packaging, and Composition

Solvent for the preparation of dosage forms for injection transparent colorless liquid.

	1 ml
Water for injections	1 ml

5 ml – bottles (50) – cardboard box.
10 ml – bottles (50) – cardboard box.
20 ml – bottles (50) – cardboard box.

Water for injections [Avexima JSC (Russia)]
Solvent for preparation of injectable dosage forms: amp. 2 ml, 5 ml, or 10 ml 5 or 10 pcs.

Marketing Authorization Holder

Avexima JSC (Russia)

Manufactured By

Avexima Siberia LLC (Russia)

Dosage Form

Water for injections

Solvent for preparation of injectable dosage forms: amp. 2 ml, 5 ml, or 10 ml 5 or 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for the preparation of dosage forms for injection in the form of a colorless, transparent liquid.

	1 amp.
Water for injections	100%

2 ml – glass ampoules (5) – contour cell packaging (1) – cardboard packs.
2 ml – glass ampoules (5) – contour cell packaging (2) – cardboard packs.
5 ml – glass ampoules (5) – contour cell packaging (1) – cardboard packs.
5 ml – glass ampoules (5) – contour cell packaging (2) – cardboard packs.
10 ml – glass ampoules (5) – contour cell packaging (1) – cardboard packs.
10 ml – glass ampoules (5) – contour cell packaging (2) – cardboard packs.

Water for injections [Akapharm, LLC (Russia)]
Solvent for the preparation of injectable dosage forms: 100 ml, 200 ml, 250 ml, 300 ml, 350 ml, 400 ml, or 450 ml bottles or fl.

Marketing Authorization Holder

Akapharm, LLC (Russia)

Dosage Form

Water for injections

Solvent for the preparation of injectable dosage forms: 100 ml, 200 ml, 250 ml, 300 ml, 350 ml, 400 ml, or 450 ml bottles or fl.

Dosage Form, Packaging, and Composition

Solvent for the preparation of dosage forms for injection transparent, colorless, odorless.

	1 ml
Water for injections	100 %

100 ml – bottles or vials – cardboard packs.
200 ml – bottles or vials – cardboard packs.
250 ml – bottles or vials – cardboard packs.
300 ml – bottles or vials – cardboard packs.
350 ml – bottles or vials – cardboard packs.
400 ml – bottles or vials – cardboard packs.
450 ml – bottles or vials – cardboard packs.
500 ml – vials – cardboard packs.
500 ml – containers – polyethylene bags.
1000 ml – containers – polyethylene bags.
100 ml – bottles (40) or vials 40 pcs. – cardboard boxes (for hospitals).
200 ml – bottles (25) or vials 25 pcs. – cardboard boxes (for hospitals).
200 ml – bottles (28) or vials 28 pcs. – cardboard boxes (for hospitals).
250 ml – bottles (15) or vials 15 pcs. – cardboard boxes (for hospitals).
300 ml – bottles (15) or vials 15 pcs. – cardboard boxes (for hospitals).
350 ml – bottles (15) or vials 15 pcs. – cardboard boxes (for hospitals).
400 ml – bottles (15) or vials 15 pcs. – cardboard boxes (for hospitals).
450 ml – bottles (15) or vials 15 pcs. – cardboard boxes (for hospitals).
500 ml – vials (15) – cardboard boxes (for hospitals).
500 ml – vials (30) – cardboard boxes (for hospitals).
1000 ml – containers (15) – cardboard boxes (for hospitals).

Water for injections [Altayvitamins, JSC (Russia)]
Solvent for preparation of injectable dosage forms 1 ml, 2 ml, 5 ml, or 10 ml: amp. 5 or 10 pcs.

Marketing Authorization Holder

Altayvitamins, JSC (Russia)

Dosage Form

Water for injections

Solvent for preparation of injectable dosage forms 1 ml, 2 ml, 5 ml, or 10 ml: amp. 5 or 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for the preparation of dosage forms for injection	1 amp.
Water for injections	100 %

1 ml – ampoules (10) – cardboard packs.
2 ml – ampoules (10) – cardboard packs.
5 ml – ampoules (10) – cardboard packs.
10 ml – ampoules (10) – cardboard packs.
1 ml – ampoules (5) – contour cell packaging (1) – cardboard packs.
2 ml – ampoules (5) – contour cell packaging (1) – cardboard packs.
5 ml – ampoules (5) – contour cell packaging (1) – cardboard packs.
10 ml – ampoules (5) – contour cell packaging (1) – cardboard packs.
1 ml – ampoules (5) – contour cell packaging (2) – cardboard packs.
2 ml – ampoules (5) – contour cell packaging (2) – cardboard packs.
5 ml – ampoules (5) – contour cell packaging (2) – cardboard packs.
10 ml – ampoules (5) – contour cell packaging (2) – cardboard packs.

Water for injections [Atoll LLC (Russia)]
Solvent for preparation of injectable dosage forms: 2 ml, 5 ml, or 10 ml amp. 5 or 10 pcs.

Marketing Authorization Holder

Atoll LLC (Russia)

Manufactured By

Ozon, LLC (Russia)

Dosage Form

Water for injections

Solvent for preparation of injectable dosage forms: 2 ml, 5 ml, or 10 ml amp. 5 or 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for the preparation of dosage forms for injection	1 amp.
Water for injections	100 %

2 ml – ampoules (5) – plastic contour packaging (1) – cardboard packs.
2 ml – ampoules (5) – plastic contour packaging (2) – cardboard packs.
2 ml – ampoules (5) – cardboard trays (1) – cardboard packs.
2 ml – ampoules (5) – cardboard trays (2) – cardboard packs.
5 ml – ampoules (5) – plastic contour packaging (1) – cardboard packs.
5 ml – ampoules (5) – plastic contour packaging (2) – cardboard packs.
5 ml – ampoules (5) – cardboard trays (1) – cardboard packs.
5 ml – ampoules (5) – cardboard trays (2) – cardboard packs.
10 ml – ampoules (5) – plastic contour packaging (1) – cardboard packs.
10 ml – ampoules (5) – plastic contour packaging (2) – cardboard packs.
10 ml – ampoules (5) – cardboard trays (1) – cardboard packs.
10 ml – ampoules (5) – cardboard trays (2) – cardboard packs.

Water for injections [Biosintez, PJSC (Russia)]
Solvent for the preparation of injectable dosage forms: 1 ml, 2 ml, 5 ml, or 10 ml amp. 5 or 10 pcs.

Marketing Authorization Holder

Biosintez, PJSC (Russia)

Dosage Form

Water for injections

Solvent for the preparation of injectable dosage forms: 1 ml, 2 ml, 5 ml, or 10 ml amp. 5 or 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for the preparation of dosage forms for injection in the form of a colorless, transparent liquid without odor.

	1 ml
Water for injections	100 %

1 ml – ampoules (5) – contour cell packaging (1) – cardboard packs.
1 ml – ampoules (5) – contour cell packaging (2) – cardboard packs.
2 ml – ampoules (5) – contour cell packaging (1) – cardboard packs.
2 ml – ampoules (5) – contour cell packaging (2) – cardboard packs.
5 ml – ampoules (5) – contour cell packaging (1) – cardboard packs.
5 ml – ampoules (5) – contour cell packaging (2) – cardboard packs.
10 ml – ampoules (5) – contour cell packaging (1) – cardboard packs.
10 ml – ampoules (5) – contour cell packaging (2) – cardboard packs.

Water for injections [Borisov Plant Of Medical Preparations, PJSC (Republic Of Belarus)]
Solvent for preparation of dosage forms for injections 2 ml: amp. 10 pcs.

Marketing Authorization Holder

Borisov Plant Of Medical Preparations, PJSC (Republic Of Belarus)

Dosage Form

Water for injections

Solvent for preparation of dosage forms for injections 2 ml: amp. 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	2 ml

2 ml – ampoules (10) – carton packs.

Water for injections [Bryntsalov-A, JSC (Russia)]
Solvent for preparation of dosage forms for injections 2 ml: amp. 5 pcs.

Marketing Authorization Holder

Bryntsalov-A, JSC (Russia)

Dosage Form

Water for injections

Solvent for preparation of dosage forms for injections 2 ml: amp. 5 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	2 ml

2 ml – ampoules (5) – contour cell packaging (1) – carton packs.
2 ml – ampoules (5) – contour cell packaging (2) – carton packs.

Water for injections [Bryntsalov-A, JSC (Russia)]
Solvent for preparation of injection dosage forms 1 mL: amp. 5 pcs.

Marketing Authorization Holder

Bryntsalov-A, JSC (Russia)

Dosage Form

Water for injections

Solvent for preparation of injection dosage forms 1 mL: amp. 5 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	1 ml

1 ml – ampoules (5) – contour cell packaging (1) – carton packs.

Water for injections [Bryntsalov-A, JSC (Russia)]
Solvent for preparation of injection dosage forms 5 mL: amp. 5 or 10 pcs.

Marketing Authorization Holder

Bryntsalov-A, JSC (Russia)

Dosage Form

Water for injections

Solvent for preparation of injection dosage forms 5 mL: amp. 5 or 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	5 ml

5 ml – ampoules (5) – contour cell packaging (1) – carton packs.
5 ml – ampoules (5) – contour cell packaging (2) – carton packs.

Water for injections [Bryntsalov-A, JSC (Russia)]
Solvent for preparation of injection dosage forms 10 mL: amp. 5 pcs.

Marketing Authorization Holder

Bryntsalov-A, JSC (Russia)

Dosage Form

Water for injections

Solvent for preparation of injection dosage forms 10 mL: amp. 5 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	10 ml

10 ml – ampoules (5) – contour cell packaging (1) – carton packs.

Water for injections [Bryntsalov-A, JSC (Russia)]
Solvent for preparation of injection dosage forms 20 mL: amp. 5 pcs.

Marketing Authorization Holder

Bryntsalov-A, JSC (Russia)

Dosage Form

Water for injections

Solvent for preparation of injection dosage forms 20 mL: amp. 5 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	20 ml

20 ml – ampoules (5) – contour cell packaging (1) – carton packs.

Water for injections [Velpharm, LLC (Russia)]
Solvent for the preparation of injectable dosage forms: amp. 1 ml, 2 ml, 3 ml, 5 ml, 10 ml, or 20 ml 5 or 10 pcs.

Marketing Authorization Holder

Velpharm, LLC (Russia)

Dosage Form

Water for injections

Solvent for the preparation of injectable dosage forms: amp. 1 ml, 2 ml, 3 ml, 5 ml, 10 ml, or 20 ml 5 or 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections in the form of a transparent, colorless liquid.

	1 ml
Water for injections	100 %

1 ml – ampoules (5) – contour cell packaging (1) – carton packs.
1 ml – ampoules (5) – contour cell packaging (2) – carton packs.
2 ml – ampoules (5) – contour cell packaging (1) – carton packs.
2 ml – ampoules (5) – contour cell packaging (2) – carton packs.
3 ml – ampoules (5) – contour cell packaging (1) – carton packs.
3 ml – ampoules (5) – contour cell packaging (2) – carton packs.
5 ml – ampoules (5) – contour cell packaging (1) – carton packs.
5 ml – ampoules (5) – contour cell packaging (2) – carton packs.
10 ml – ampoules (5) – contour cell packaging (1) – carton packs.
10 ml – ampoules (5) – contour cell packaging (2) – carton packs.
20 ml – ampoules (5) – contour cell packaging (1) – carton packs.
20 ml – ampoules (5) – contour cell packaging (2) – carton packs.

Water for injections [Generium, JSC (Russia)]
Solvent for the preparation of injectable dosage forms: fl. 5 ml 56 pcs. or fl. 10 ml 50 pcs

Marketing Authorization Holder

Generium, JSC (Russia)

Dosage Form

Water for injections

Solvent for the preparation of injectable dosage forms: fl. 5 ml 56 pcs. or fl. 10 ml 50 pcs

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections in the form of a colorless, transparent liquid without odor.

	1 fl.
Water for injections	100%

5 ml – glass vials (56) – carton boxes with partitions.
10 ml – glass vials (50) – carton boxes with partitions.

Water for injections [Grotex, LLC (Russia)]
Solvent for preparation of injectable dosage forms: 2 ml, 5 ml, or 10 ml amp. 5 or 10 pcs.

Marketing Authorization Holder

Grotex, LLC (Russia)

Dosage Form

Water for injections

Solvent for preparation of injectable dosage forms: 2 ml, 5 ml, or 10 ml amp. 5 or 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections transparent, colorless, odorless.

	1 amp.
Water for injections	100 %

2 ml – ampoules (5) – strips (1) – carton packs.
2 ml – ampoules (5) – strips (2) – carton packs.
5 ml – ampoules (5) – strips (1) – carton packs.
5 ml – ampoules (5) – strips (2) – carton packs.
10 ml – ampoules (5) – strips (1) – carton packs.
10 ml – ampoules (5) – strips (2) – carton packs.

Water for injections [Dalkhimpharm, JSC (Russia)]
Solvent for the preparation of injectable dosage forms: amp. 1 ml, 2 ml, 5 ml, or 10 ml 10 pcs.

Marketing Authorization Holder

Dalkhimpharm, JSC (Russia)

Dosage Form

Water for injections

Solvent for the preparation of injectable dosage forms: amp. 1 ml, 2 ml, 5 ml, or 10 ml 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections in the form of a transparent, colorless liquid, odorless.

	1 ml
Water for injections	100 %

1 ml – ampoules (10) – carton boxes.
2 ml – ampoules (10) – carton boxes.
5 ml – ampoules (10) – carton boxes.
10 ml – ampoules (10) – carton boxes.
1 ml – ampoules (5) – contour cell packaging (2) – carton packs.
2 ml – ampoules (5) – contour cell packaging (2) – carton packs.
5 ml – ampoules (5) – contour cell packaging (2) – carton packs.

Water for injections [Medsintez Plant, LLC (Russia)]
Solvent for the preparation of injectable dosage forms: 100 ml amp. 50 pcs., 250 ml amp. 24 pcs., 500 ml amp. 12 pcs., 1000 ml amp. 6 pcs., 2000 ml amp. 4 pcs.

Marketing Authorization Holder

Medsintez Plant, LLC (Russia)

Dosage Form

Water for injections

Solvent for the preparation of injectable dosage forms: 100 ml amp. 50 pcs., 250 ml amp. 24 pcs., 500 ml amp. 12 pcs., 1000 ml amp. 6 pcs., 2000 ml amp. 4 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections in the form of a colorless, transparent liquid without odor.

	1 ml
Water for injections	100 %

100 ml – containers (50) – carton boxes (for hospitals).
250 ml – containers (24) – carton boxes (for hospitals).
500 ml – containers (12) – carton boxes (for hospitals).
1000 ml – containers (6) – carton boxes (for hospitals).
2000 ml – containers (4) – carton boxes (for hospitals).

Water for injections [IST-Pharm, LLC (Russia)]
Solvent for preparation of injectable dosage forms: bot. 100 ml, 250 ml, or 500 ml

Marketing Authorization Holder

IST-Pharm, LLC (Russia)

Manufactured By

IST-Pharm, LLC (Russia)

Pharmasintez-Tyumen, LLC (Russia)

Dosage Form

Water for injections

Solvent for preparation of injectable dosage forms: bot. 100 ml, 250 ml, or 500 ml

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections in the form of a colorless, transparent liquid, odorless.

	1 bot.
Water for injections	100%

100 ml – polyethylene bottles (1) – carton packs.
250 ml – polyethylene bottles (1) – carton packs.
500 ml – polyethylene bottles (1) – carton packs.

Water for injections [Deko Company, LLC (Russia)]
Solvent for preparation of dosage forms for injections 2 ml: amp. 10 pcs.

Marketing Authorization Holder

Deko Company, LLC (Russia)

Dosage Form

Water for injections

Solvent for preparation of dosage forms for injections 2 ml: amp. 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	2 ml

2 ml – ampoules (5) – plastic contour packaging (2) – carton packs.
2 ml – ampoules (10) – plastic contour packaging (1) – carton packs.

Water for injections [Deko Company, LLC (Russia)]
Solvent for preparation of injection dosage forms 5 mL: amp. 5 or 10 pcs.

Marketing Authorization Holder

Deko Company, LLC (Russia)

Dosage Form

Water for injections

Solvent for preparation of injection dosage forms 5 mL: amp. 5 or 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	5 ml

5 ml – ampoules (5) – plastic contour packaging (1) – carton packs.
5 ml – ampoules (5) – plastic contour packaging (2) – carton packs.
5 ml – ampoules (10) – plastic contour packaging (1) – carton packs.

Water for injections [Deko Company, LLC (Russia)]
Solvent for preparation of dosage forms for injections 10 ml: amp. 10 pcs.

Marketing Authorization Holder

Deko Company, LLC (Russia)

Dosage Form

Water for injections

Solvent for preparation of dosage forms for injections 10 ml: amp. 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	10 ml

10 ml – ampoules (5) – plastic contour packaging (2) – carton packs.
10 ml – ampoules (10) – plastic contour packaging (1) – carton packs.

Water for injections [Kursk Biofactory - Firm "BIOK", FKP (Russia)]
Solvent for the preparation of injectable dosage forms 1 ml, 2 ml, or 5 ml: amp. 5 or 10 pcs.

Marketing Authorization Holder

Kursk Biofactory – Firm “BIOK”, FKP (Russia)

Dosage Form

Water for injections

Solvent for the preparation of injectable dosage forms 1 ml, 2 ml, or 5 ml: amp. 5 or 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections in the form of a colorless, transparent liquid without odor.

	1 ml
Water for injections	100 %

1 ml – ampoules (5) – contour cell packaging (1) – carton packs.
1 ml – ampoules (5) – contour cell packaging (2) – carton packs.
1 ml – ampoules (5) – contour cell packaging (50) – carton boxes (for hospitals).
1 ml – ampoules (5) – contour cell packaging (100) – carton boxes (for hospitals).
2 ml – ampoules (5) – contour cell packaging (1) – carton packs.
2 ml – ampoules (5) – contour cell packaging (2) – carton packs.
2 ml – ampoules (5) – contour cell packaging (50) – carton boxes (for hospitals).
2 ml – ampoules (5) – contour cell packaging (100) – carton boxes (for hospitals).
5 ml – ampoules (5) – contour cell packaging (1) – carton packs.
5 ml – ampoules (5) – contour cell packaging (2) – carton packs.
5 ml – ampoules (5) – contour cell packaging (50) – carton boxes (for hospitals).
5 ml – ampoules (5) – contour cell packaging (100) – carton boxes (for hospitals).

Water for injections [Medical Leasing-Consulting, LLC (Russia)]
Solvent for preparation of injectable dosage forms 1 ml: amp. 2 ml, 5 ml, or 10 ml 1, 2, 5, 10, 50, or 100 pcs.

Marketing Authorization Holder

Medical Leasing-Consulting, LLC (Russia)

Manufactured By

Dalkhimpharm, JSC (Russia)

Dosage Form

Water for injections

Solvent for preparation of injectable dosage forms 1 ml: amp. 2 ml, 5 ml, or 10 ml 1, 2, 5, 10, 50, or 100 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections in the form of a colorless, transparent liquid, odorless.

	1 ml
Water for injections	1 ml

2 ml – ampoules (1) – carton packs.
2 ml – ampoules (2) – carton packs.
2 ml – ampoules (5) – carton packs.
2 ml – ampoules (10) – carton packs.
2 ml – ampoules (50) – carton packs.
2 ml – ampoules (100) – carton packs.
5 ml – ampoules (1) – carton packs.
5 ml – ampoules (2) – carton packs.
5 ml – ampoules (5) – carton packs.
5 ml – ampoules (10) – carton packs.
5 ml – ampoules (50) – carton packs.
5 ml – ampoules (100) – carton packs.
10 ml – ampoules (1) – carton packs.
10 ml – ampoules (2) – carton packs.
10 ml – ampoules (5) – carton packs.
10 ml – ampoules (10) – carton packs.
10 ml – ampoules (50) – carton packs.
10 ml – ampoules (100) – carton packs.

Water for injections [Moscow Endocrine Plant FSUE (Russia)]
Solvent for preparation of injectable dosage forms 1 ml, 2 ml, 5 ml, or 10 ml: amp. 4, 8, 16, or 100 pcs.

Marketing Authorization Holder

Moscow Endocrine Plant FSUE (Russia)

Dosage Form

Water for injections

Solvent for preparation of injectable dosage forms 1 ml, 2 ml, 5 ml, or 10 ml: amp. 4, 8, 16, or 100 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 ml
Water for injections	100 %

1 ml – ampoules (4) – carton packs.
1 ml – ampoules (8) – carton packs.
1 ml – ampoules (16) – carton packs.
1 ml – ampoules (100) – carton boxes.
2 ml – ampoules (4) – carton packs.
2 ml – ampoules (8) – carton packs.
2 ml – ampoules (16) – carton packs.
2 ml – ampoules (100) – carton boxes.
5 ml – ampoules (4) – carton packs.
5 ml – ampoules (8) – carton packs.
5 ml – ampoules (16) – carton packs.
5 ml – ampoules (100) – carton boxes.
10 ml – ampoules (4) – carton packs.
10 ml – ampoules (8) – carton packs.
10 ml – ampoules (16) – carton packs.
10 ml – ampoules (100) – carton boxes.

Water for injections [N.A. Semashko Moscow Chemical Pharmaceutical Preparations, JSC (Russia)]
Solvent for preparation of dosage forms for injections 2 ml: amp. 10 pcs.

Marketing Authorization Holder

N.A. Semashko Moscow Chemical Pharmaceutical Preparations, JSC (Russia)

Dosage Form

Water for injections

Solvent for preparation of dosage forms for injections 2 ml: amp. 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	2 ml

2 ml – ampoules (10) – carton packs.
2 ml – ampoules (5) – contour cell packs (2) – carton packs.

Water for injections [MC Ellara, LLC (Russia)]
Solvent for preparation of injectable dosage forms 2 ml: amp. 5, 10, 250 or 500 pcs.

Marketing Authorization Holder

MC Ellara, LLC (Russia)

Dosage Form

Water for injections

Solvent for preparation of injectable dosage forms 2 ml: amp. 5, 10, 250 or 500 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	2 ml

2 ml – ampoules (5) – plastic contour packs (1) – carton packs.
2 ml – ampoules (5) – plastic contour packs (2) – carton packs.
2 ml – ampoules (250) – carton boxes (for hospitals).
2 ml – ampoules (500) – carton boxes (for hospitals).

Water for injections [MC Ellara, LLC (Russia)]
Solvent for preparation of dosage forms for injections 1 ml: amp. 5, 10, 250 or 500 pcs.

Marketing Authorization Holder

MC Ellara, LLC (Russia)

Dosage Form

Water for injections

Solvent for preparation of dosage forms for injections 1 ml: amp. 5, 10, 250 or 500 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	1 ml

1 ml – ampoules (5) – plastic contour packs (1) – carton packs.
1 ml – ampoules (5) – plastic contour packs (2) – carton packs.
1 ml – ampoules (250) – carton boxes (for hospitals).
1 ml – ampoules (500) – carton boxes (for hospitals).

Water for injections [MC Ellara, LLC (Russia)]
Solvent for preparation of injectable dosage forms 3 ml: amp. 5, 10, 250 or 500 pcs.

Marketing Authorization Holder

MC Ellara, LLC (Russia)

Dosage Form

Water for injections

Solvent for preparation of injectable dosage forms 3 ml: amp. 5, 10, 250 or 500 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	3 ml

3 ml – ampoules (5) – plastic contour packs (1) – carton packs.
3 ml – ampoules (5) – plastic contour packs (2) – carton packs.
3 ml – ampoules (250) – carton boxes (for hospitals).
3 ml – ampoules (500) – carton boxes (for hospitals).

Water for injections [MC Ellara, LLC (Russia)]
Solvent for preparation of injectable dosage forms 5 ml: amp. 5, 10, 250 or 500 pcs.

Marketing Authorization Holder

MC Ellara, LLC (Russia)

Dosage Form

Water for injections

Solvent for preparation of injectable dosage forms 5 ml: amp. 5, 10, 250 or 500 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	5 ml

5 ml – ampoules (5) – plastic contour packs (1) – carton packs.
5 ml – ampoules (5) – plastic contour packs (2) – carton packs.
5 ml – ampoules (250) – carton boxes (for hospitals).
5 ml – ampoules (500) – carton boxes (for hospitals).

Water for injections [Novosibkhimpharm, JSC (Russia)]
Solvent for preparation of injectable dosage forms 5 ml: amp. 10 pcs.

Marketing Authorization Holder

Novosibkhimpharm, JSC (Russia)

Dosage Form

Water for injections

Solvent for preparation of injectable dosage forms 5 ml: amp. 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	5 ml

5 ml – ampoules (10) – carton packs.

Water for injections [Novosibkhimpharm, JSC (Russia)]
Solvent for preparation of dosage forms for injections 1 ml: amp. 10 pcs.

Marketing Authorization Holder

Novosibkhimpharm, JSC (Russia)

Dosage Form

Water for injections

Solvent for preparation of dosage forms for injections 1 ml: amp. 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	1 ml

1 ml – ampoules (10) – carton packs.

Water for injections [Novosibkhimpharm, JSC (Russia)]
Solvent for preparation of dosage forms for injections 2 ml: amp. 10 pcs.

Marketing Authorization Holder

Novosibkhimpharm, JSC (Russia)

Dosage Form

Water for injections

Solvent for preparation of dosage forms for injections 2 ml: amp. 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	2 ml

2 ml – ampoules (10) – carton packs.

Water for injections [Novosibkhimpharm, JSC (Russia)]
Solvent for the preparation of injectable dosage forms: 1 ml, 2 ml, 3 ml, 5 ml, or 10 ml amp. from 5 to 150 pcs.

Marketing Authorization Holder

Novosibkhimpharm, JSC (Russia)

Dosage Form

Water for injections

Solvent for the preparation of injectable dosage forms: 1 ml, 2 ml, 3 ml, 5 ml, or 10 ml amp. from 5 to 150 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections in the form of a transparent, colorless liquid, odorless.

	1 amp.
Water for injections	100%

1 ml – neutral glass ampoules (5) – contour cell packs (1) – carton packs.
1 ml – neutral glass ampoules (5) – contour cell packs (2) – carton packs.
1 ml – neutral glass ampoules (10) – contour cell packs (1) – carton packs.
1 ml – neutral glass ampoules (10) – contour cell packs (2) – carton packs.
1 ml – neutral glass ampoules (10) – carton boxes.
1 ml – neutral glass ampoules (from 50 to 150 pcs.) – carton boxes with a grid.
2 ml – neutral glass ampoules (5) – contour cell packs (1) – carton packs.
2 ml – neutral glass ampoules (5) – contour cell packs (2) – carton packs.
2 ml – neutral glass ampoules (10) – contour cell packs (1) – carton packs.
2 ml – neutral glass ampoules (10) – contour cell packs (2) – carton packs.
2 ml – neutral glass ampoules (10) – carton boxes.
2 ml – neutral glass ampoules (from 50 to 150 pcs.) – carton boxes with a grid.
3 ml – neutral glass ampoules (5) – contour cell packs (1) – carton packs.
3 ml – neutral glass ampoules (5) – contour cell packs (2) – carton packs.
3 ml – neutral glass ampoules (10) – contour cell packs (1) – carton packs.
3 ml – neutral glass ampoules (10) – contour cell packs (2) – carton packs.
3 ml – neutral glass ampoules (10) – carton boxes.
3 ml – neutral glass ampoules (from 50 to 150 pcs.) – carton boxes with a grid.
5 ml – neutral glass ampoules (5) – contour cell packs (1) – carton packs.
5 ml – neutral glass ampoules (5) – contour cell packs (2) – carton packs.
5 ml – neutral glass ampoules (10) – contour cell packs (1) – carton packs.
5 ml – neutral glass ampoules (10) – contour cell packs (2) – carton packs.
5 ml – neutral glass ampoules (10) – carton boxes.
5 ml – neutral glass ampoules (from 50 to 150 pcs.) – carton boxes with a grid.
10 ml – neutral glass ampoules (5) – contour cell packs (1) – carton packs.
10 ml – neutral glass ampoules (5) – contour cell packs (2) – carton packs.
10 ml – neutral glass ampoules (10) – contour cell packs (1) – carton packs.
10 ml – neutral glass ampoules (10) – contour cell packs (2) – carton packs.
10 ml – neutral glass ampoules (10) – carton boxes.
10 ml – neutral glass ampoules (from 50 to 150 pcs.) – carton boxes with a grid.

Water for injections [Novosibkhimpharm, JSC (Russia)]
Solvent for preparation of dosage forms for injections 10 ml: amp. 10 pcs.

Marketing Authorization Holder

Novosibkhimpharm, JSC (Russia)

Dosage Form

Water for injections

Solvent for preparation of dosage forms for injections 10 ml: amp. 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	10 ml

10 ml – ampoules (10) – carton packs.

Water for injections [Microgen NPO, JSC (Russia)]
Solvent for preparation of dosage forms for injections 1 ml: amp. 10 pcs.

Marketing Authorization Holder

Microgen NPO, JSC (Russia)

Dosage Form

Water for injections

Solvent for preparation of dosage forms for injections 1 ml: amp. 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	1 ml

1 ml – ampoules (10) – carton packs.

Water for injections [Microgen NPO, JSC (Russia)]
Solvent for preparation of dosage forms for injections 2 ml: amp. 10 pcs.

Marketing Authorization Holder

Microgen NPO, JSC (Russia)

Dosage Form

Water for injections

Solvent for preparation of dosage forms for injections 2 ml: amp. 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	2 ml

2 ml – ampoules (10) – carton packs.

Water for injections [Microgen NPO, JSC (Russia)]
Solvent for preparation of injectable dosage forms 3 ml: amp. 10 pcs.

Marketing Authorization Holder

Microgen NPO, JSC (Russia)

Dosage Form

Water for injections

Solvent for preparation of injectable dosage forms 3 ml: amp. 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	3 ml

3 ml – ampoules (10) – carton packs.

Water for injections [Microgen NPO, JSC (Russia)]
Solvent for preparation of injectable dosage forms 5 ml: amp. 10 pcs.

Marketing Authorization Holder

Microgen NPO, JSC (Russia)

Dosage Form

Water for injections

Solvent for preparation of injectable dosage forms 5 ml: amp. 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	5 ml

5 ml – ampoules (10) – carton packs.

Water for injections [Microgen NPO, JSC (Russia)]
Solvent for preparation of dosage forms for injections 10 ml: amp. 10 pcs.

Marketing Authorization Holder

Microgen NPO, JSC (Russia)

Dosage Form

Water for injections

Solvent for preparation of dosage forms for injections 10 ml: amp. 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	10 ml

10 ml – ampoules (10) – carton packs.

Water for injections [Microgen NPO, JSC (Russia)]
Solvent for the preparation of injectable dosage forms 25 ml: vial 1 pc.

Marketing Authorization Holder

Microgen NPO, JSC (Russia)

Dosage Form

Water for injections

Solvent for the preparation of injectable dosage forms 25 ml: vial 1 pc.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 vial
Water for injections	25 ml

25 ml – bottles for blood and blood substitutes (1) – carton packs.

Water for injections [Microgen NPO, JSC (Russia)]
Solvent for the preparation of injectable dosage forms 50 ml: vial 1 pc.

Marketing Authorization Holder

Microgen NPO, JSC (Russia)

Dosage Form

Water for injections

Solvent for the preparation of injectable dosage forms 50 ml: vial 1 pc.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 vial
Water for injections	50 ml

50 ml – bottles for blood and blood substitutes (1) – carton packs.

Water for injections [Promomed Rus LLC (Russia)]
Solvent for preparation of injection dosage forms: 2 mL or 5 mL amp. 5 or 10 pcs.

Marketing Authorization Holder

Promomed Rus LLC (Russia)

Dosage Form

Water for injections

Solvent for preparation of injection dosage forms: 2 mL or 5 mL amp. 5 or 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	100 %

2 ml – ampoules (10) – carton packs.
2 ml – ampoules (5) – plastic contour packs (1) – carton packs.
2 ml – ampoules (5) – plastic contour packs (2) – carton packs.
5 ml – ampoules (10) – carton boxes.
5 ml – ampoules (5) – plastic contour packs (1) – carton packs.

Water for injections [Promomed Rus LLC (Russia)]
Solvent for preparation of injection dosage forms 5 mL: amp. 5 or 10 pcs.

Marketing Authorization Holder

Promomed Rus LLC (Russia)

Dosage Form

Water for injections

Solvent for preparation of injection dosage forms 5 mL: amp. 5 or 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	5 ml

5 ml – ampoules (5) – carton packs.
5 ml – ampoules (10) – carton packs.
5 ml – ampoules (5) – plastic contour packs (1) – carton packs.
5 ml – ampoules (5) – plastic contour packs (2) – carton packs.

Water for injections [S.P. Incomed, LLC (Russia)]
Solvent for preparation of injectable dosage forms: 2 ml, 5 ml, 10 ml amp. 10, 20, 50 or 100 pcs.

Marketing Authorization Holder

S.P. Incomed, LLC (Russia)

Manufactured By

Protech Biosystems, Pvt. Ltd. (India)

Dosage Form

Water for injections

Solvent for preparation of injectable dosage forms: 2 ml, 5 ml, 10 ml amp. 10, 20, 50 or 100 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections in the form of a colorless, transparent liquid without odor.

	1 ml
Water for injections	100 %

2 ml – ampoules (10) – carton packs.
2 ml – ampoules (20) – carton packs.
2 ml – ampoules (50) – carton packs.
2 ml – ampoules (100) – carton packs.
5 ml – ampoules (10) – carton packs.
5 ml – ampoules (20) – carton packs.
5 ml – ampoules (50) – carton packs.
5 ml – ampoules (100) – carton packs.
10 ml – ampoules (10) – carton packs.
10 ml – ampoules (20) – carton packs.
10 ml – ampoules (50) – carton packs.
10 ml – ampoules (100) – carton packs.

Water for injections [Sintez PJSC (Russia)]
Solvent for preparation of injectable dosage forms: amp. 2 ml, 3 ml, 5 ml, or 10 ml 5 or 10 pcs.

Marketing Authorization Holder

Sintez PJSC (Russia)

Dosage Form

Water for injections

Solvent for preparation of injectable dosage forms: amp. 2 ml, 3 ml, 5 ml, or 10 ml 5 or 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections in the form of a colorless, transparent liquid.

	1 amp.
Water for injections	100 %

2 ml – glass ampoules (5) – contour cell packs (1) – carton packs.
2 ml – glass ampoules (5) – contour cell packs (2) – carton packs.
3 ml – glass ampoules (5) – contour cell packs (1) – carton packs.
3 ml – glass ampoules (5) – contour cell packs (2) – carton packs.
5 ml – glass ampoules (5) – contour cell packs (1) – carton packs.
5 ml – glass ampoules (5) – contour cell packs (2) – carton packs.
10 ml – glass ampoules (5) – contour cell packs (1) – carton packs.
10 ml – glass ampoules (5) – contour cell packs (2) – carton packs.

Water for injections [Slavic Pharmacy, LLC (Russia)]
Solvent for the preparation of injectable dosage forms: amp. 2 ml, 5 ml, or 10 ml

Marketing Authorization Holder

Slavic Pharmacy, LLC (Russia)

Dosage Form

Water for injections

Solvent for the preparation of injectable dosage forms: amp. 2 ml, 5 ml, or 10 ml

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections in the form of a colorless transparent liquid without odor.

	1 amp.
Water for injections	100 %

2 ml – polymer ampoules (5) – carton packs.
2 ml – polymer ampoules (10) – carton packs.
5 ml – polymer ampoules (5) – carton packs.
5 ml – polymer ampoules (10) – carton packs.
10 ml – polymer ampoules (5) – carton packs.
10 ml – polymer ampoules (10) – carton packs.

Water for injections [Statusfarm LLC (Russia)]
Solvent for preparation of injectable dosage forms: amp. 2 ml 10 pcs.

Marketing Authorization Holder

Statusfarm LLC (Russia)

Manufactured By

Yerevan Chemical And Pharmaceutical Firm, OJSC (Armenia)

Dosage Form

Water for injections

Solvent for preparation of injectable dosage forms: amp. 2 ml 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections in the form of a transparent, colorless liquid, without odor.

	1 amp.
Water for injections	100%

2 ml – glass ampoules (10) complete with an ampoule knife or ampoule scarifier – carton packs.

Water for injections [Pharmasintez, JSC (Russia)]
Solvent for preparation of injectable dosage forms: amp. 2 ml, 5 ml, or 10 ml 5 or 10 pcs.

Marketing Authorization Holder

Pharmasintez, JSC (Russia)

Dosage Form

Water for injections

Solvent for preparation of injectable dosage forms: amp. 2 ml, 5 ml, or 10 ml 5 or 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections in the form of a colorless, transparent liquid without odor.

	1 amp.
Water for injections	100 %

2 ml – polyethylene ampoules (5) – plastic cassettes (1) – carton packs.
2 ml – polyethylene ampoules (10) – plastic cassettes (1) – carton packs.
5 ml – polyethylene ampoules (5) – plastic cassettes (1) – carton packs.
5 ml – polyethylene ampoules (10) – plastic cassettes (1) – carton packs.
10 ml – polyethylene ampoules (5) – plastic cassettes (1) – carton packs.
10 ml – polyethylene ampoules (10) – plastic cassettes (1) – carton packs.
10 ml – colorless glass ampoules (5) – contour blisters (1) – carton packs.
10 ml – colorless glass ampoules (5) – contour blisters (2) – carton packs.
10 ml – colorless glass ampoules (10) – contour blisters (1) – carton packs.

Water for injections [Pharmstandard-UfaVITA OJSC (Russia)]
Solvent for preparation of dosage forms for injections 2 ml: amp. 5 pcs.

Marketing Authorization Holder

Pharmstandard-UfaVITA OJSC (Russia)

Dosage Form

Water for injections

Solvent for preparation of dosage forms for injections 2 ml: amp. 5 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	2 ml

2 ml – ampoules (10) – carton boxes.

Water for injections [Pharmstandard-UfaVITA OJSC (Russia)]
Solvent for preparation of injectable dosage forms 5 ml: amp. 10 or 100 pcs.

Marketing Authorization Holder

Pharmstandard-UfaVITA OJSC (Russia)

Dosage Form

Water for injections

Solvent for preparation of injectable dosage forms 5 ml: amp. 10 or 100 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	5 ml

5 ml – ampoules (10) – carton boxes.
5 ml – ampoules (100) – carton boxes (1) – cardboard boxes.

Water for injections [Pharmstandard-UfaVITA OJSC (Russia)]
Solvent for preparation of dosage forms for injections 10 ml: amp. 10 pcs.

Marketing Authorization Holder

Pharmstandard-UfaVITA OJSC (Russia)

Dosage Form

Water for injections

Solvent for preparation of dosage forms for injections 10 ml: amp. 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	10 ml

10 ml – ampoules (10) – carton boxes.

Water for injections [Pharmstandard-UfaVITA OJSC (Russia)]
Solvent for the preparation of injectable dosage forms: 0.7 ml, 1 ml, 2 ml, 4 ml, 5 ml, 8 ml, or 10 ml amp. or fl. 5 or 10 pcs.

Marketing Authorization Holder

Pharmstandard-UfaVITA OJSC (Russia)

Dosage Form

Water for injections

Solvent for the preparation of injectable dosage forms: 0.7 ml, 1 ml, 2 ml, 4 ml, 5 ml, 8 ml, or 10 ml amp. or fl. 5 or 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections in the form of a transparent, colorless liquid, without odor.

	1 amp./1 fl.
Water for injections	100 %

0.7 ml – glass ampoules (5) – contour cell packs (1) – carton packs.
0.7 ml – glass ampoules (5) – contour cell packs (2) – carton packs.
1 ml – glass ampoules (5) – contour cell packs (1) – carton packs.
1 ml – glass ampoules (5) – contour cell packs (2) – carton packs.
2 ml – glass ampoules (5) – contour cell packs (1) – carton packs.
2 ml – glass ampoules (5) – contour cell packs (2) – carton packs.
5 ml – glass ampoules (5) – contour cell packs (1) – carton packs.
5 ml – glass ampoules (5) – contour cell packs (2) – carton packs.
10 ml – glass ampoules (5) – contour cell packs (1) – carton packs.
10 ml – glass ampoules (5) – contour cell packs (2) – carton packs.
2 ml – vials with a capacity of 5 ml (5) – contour cell packs (1) – carton packs.
2 ml – vials with a capacity of 5 ml (5) – contour cell packs (2) – carton packs.
4 ml – vials with a capacity of 5 ml (5) – contour cell packs (1) – carton packs.
4 ml – vials with a capacity of 5 ml (5) – contour cell packs (2) – carton packs.
5 ml – vials with a capacity of 5 ml (5) – contour cell packs (1) – carton packs.
5 ml – vials with a capacity of 5 ml (5) – contour cell packs (2) – carton packs.
8 ml – vials with a capacity of 10 ml (5) – contour cell packs (1) – carton packs.
8 ml – vials with a capacity of 10 ml (5) – contour cell packs (2) – carton packs.
10 ml – vials with a capacity of 10 ml (5) – contour cell packs (1) – carton packs.
10 ml – vials with a capacity of 10 ml (5) – contour cell packs (2) – carton packs.

Water for injections [Ferment Firm, LLC (Russia)]
Solvent for preparation of injectable dosage forms 5 ml: amp. 10 pcs.

Marketing Authorization Holder

Ferment Firm, LLC (Russia)

Dosage Form

Water for injections

Solvent for preparation of injectable dosage forms 5 ml: amp. 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of injectable dosage forms	1 amp.
Water for injections	5 ml

5 ml – ampoules (5) – plastic contour packs (2) – cardboard packs.

Water for injections [Mir Chemical and Pharmaceutical Concern, LLC (Russia)]
Solvent for preparation of injection dosage forms 5 mL: amp. 5 or 10 pcs.

Marketing Authorization Holder

Mir Chemical and Pharmaceutical Concern, LLC (Russia)

Dosage Form

Water for injections

Solvent for preparation of injection dosage forms 5 mL: amp. 5 or 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of injectable dosage forms	1 amp.
Water for injections	5 ml

5 ml – ampoules (5) – plastic contour packs (1) – cardboard packs.
5 ml – ampoules (10) – plastic contour packs (1) – cardboard packs.

Water for injections [Mir Chemical and Pharmaceutical Concern, LLC (Russia)]
Solvent for the preparation of injectable dosage forms 2 ml: amp. 5 or 10 pcs.

Marketing Authorization Holder

Mir Chemical and Pharmaceutical Concern, LLC (Russia)

Dosage Form

Water for injections

Solvent for the preparation of injectable dosage forms 2 ml: amp. 5 or 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of injectable dosage forms	1 amp.
Water for injections	2 ml

2 ml – ampoules (5) – plastic contour packs (1) – cardboard packs.
2 ml – ampoules (10) – plastic contour packs (1) – cardboard packs.

Water for injections [Mir Chemical and Pharmaceutical Concern, LLC (Russia)]
Solvent for the preparation of injectable dosage forms 10 ml: amp. 5 or 10 pcs.

Marketing Authorization Holder

Mir Chemical and Pharmaceutical Concern, LLC (Russia)

Dosage Form

Water for injections

Solvent for the preparation of injectable dosage forms 10 ml: amp. 5 or 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of injectable dosage forms	1 amp.
Water for injections	10 ml

10 ml – ampoules (5) – plastic contour packs (1) – cardboard packs.
10 ml – ampoules (10) – plastic contour packs (1) – cardboard packs.
10 ml – ampoules (10) – plastic contour packs (2) – cardboard packs.

Water for injections [Ellara, LLC (Russia)]
Solvent for the preparation of injectable dosage forms: 1 ml, 2 ml, 3 ml, 4 ml, 5 ml, or 10 ml amp. 5 or 10 pcs. in a kit with or without syringes

Marketing Authorization Holder

Ellara, LLC (Russia)

Dosage Form

Water for injections

Solvent for the preparation of injectable dosage forms: 1 ml, 2 ml, 3 ml, 4 ml, 5 ml, or 10 ml amp. 5 or 10 pcs. in a kit with or without syringes

Dosage Form, Packaging, and Composition

Solvent for preparation of injectable dosage forms as a transparent, colorless liquid, odorless.

	1 amp.
Water for injections	100%

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	5 ml

5 ml – ampoules (5) – contour cell packaging (2) – cardboard packs.
5 ml – ampoules (10) – cardboard packs.

Water for injections-vial [Vial, LLC (Russia)]
Solvent for preparation of injectable dosage forms: 2 ml or 5 ml amp. 10 pcs.

Marketing Authorization Holder

Vial, LLC (Russia)

Manufactured By

CSPC Ouyi Pharmaceutical, Co. Ltd. (China)

Dosage Form

Water for injections-vial

Solvent for preparation of injectable dosage forms: 2 ml or 5 ml amp. 10 pcs.

Dosage Form, Packaging, and Composition

Solvent for preparation of dosage forms for injections	1 amp.
Water for injections	100 %

2 ml – ampoules (10) – plastic contour packaging (1) – cardboard packs.
5 ml – ampoules (10) – plastic contour packaging (1) – cardboard packs.

Medixlife (Author)

View all posts Profile link